Exocad denture module - tooth library

Discussion in 'exocad' started by Quentin Rahaus, Feb 2, 2017.

  1. Quentin Rahaus

    Quentin Rahaus New Member

    Does anyone have a denture tooth library available in stl ? I am trying to use the exocad full denture module but it needs a tooth library to enable a digital workflow and allowing configuration. There are some 3shape dcm files around, but impossible to convert.
    It would need to match / work with any denture tooth brands available.
    From my experience so far, options are limited to locked systems (AG, 3Shape, Mertz etc).
    Any input welcome..
     
  2. DMC

    DMC Scott Hudson

    Only from the Denture tooth manufacture.

    I dunno what tooth manufacture has digitized all their teeth?

    I am sure somebody has done this! OF course!

    or

    I suggest using just basic crown and bridge + gingiva + any tooth library you want!

    You can trim to opposing and make it really custom stuff.

    Then, you need to find some good PMMA to work with and machine the teeth.
     
    lucky54 likes this.
  3. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    This is a project a few of us here have been working on. Just takes a long time to scan denture molds. Also working on converting some other software teeth into stl files.
     
    Joops Jungs and alphadental like this.
  4. lucky54

    lucky54 Well-Known Member




    http://zirkonzahn.com/de/produkte/werkstoffe/multistratum-flexible
     
  5. One

    One New Member

    ivoclar and Candulor have made there lines available in 3shape....... Exocad should sign up with those so that we get those to. The biggest problem is positioning room, if you make a denture bij hand you wil almost always grind the teeth down..... Other system I have seen grinds de denture bodem, grinds room for teeth. You lut some sort of 1 color teeth in, get the hole thing back in the machine and then the teeth get grinded to the right height.

    those teeth are ugly at the moment.....

    just for info.

    thanks One
     
    lucky54 and DMC like this.
  6. Gerhard Motz

    Gerhard Motz New Member

    Hi Experts, has some one still the Tooth Editor Programm from EXOCAD, so I can do my own special tooth Libary for Exocad. I have done it ,but now no acsess anymore to the program.
     
  7. moh

    moh Active Member

    Hello,
    I am a 3shape user, I have vita and candulor teeth librairies in STL files and would like to exchange them with some inexpensive teeth library like acrylux ( ruthinium) in dcm format for use in 3shape.

    labo3d@outlook.com

     
    One likes this.
  8. Macplatao

    Macplatao New Member

    Anyone with Merz Library for full denture? Exocad...
     
  9. JM

    JM Member

    i have AG Heraeus libraries - csdfa files. But already converted some libraries in stl.
     
  10. JM

    JM Member

  11. Macplatao

    Macplatao New Member

    If I can help, I now have Merz Artegal anteriors library. Who is working on this at the moment?
     

Share This Page