exocad Model Creator info

Discussion in 'exocad' started by DMC, Sep 29, 2014.

  1. Macplatao

    Macplatao New Member

    A little doubt... How can I change the angle of the die, is it possible?

    Plateless model.jpg
  2. DMC

    DMC Scott Hudson

    How did you make that happen?

    You import a die and mix with another mesh?
  3. Macplatao

    Macplatao New Member

    :) Nothing unusual... My DOF scanned the model and the dies... and started model creator ond exocad...
  4. DMC

    DMC Scott Hudson

    Why are you using Model creator if you already have a model and dies?

  5. LiQUiD

    LiQUiD Active Member

    Does anyone know any settings for printing on a formlabs form2 so that the removable dies arnt wobbly or loose? The stock default setting for vertical and horizontal is at 0.09. It won't let me go below that.
  6. Macplatao

    Macplatao New Member

    Because I want to print a Geller Model...
  7. Toothman19

    Toothman19 Well-Known Member

    You can free form the scan data and add to cover up the die
  8. Macplatao

    Macplatao New Member

    I know... But I would like to keep it original. Just needed to angulate the pin, or other solution...
  9. cadfan

    cadfan Moderator Staff Member

    Angel the model so stump will be angled too not sure its without problems on the molar ??!! 1 pic straight 2 and 3 angulated

    Attached Files:

    Kongo-Otto, 2thm8kr and Toothman19 like this.
  10. Kvonn3gut

    Kvonn3gut Administrator Staff Member


    When you are placing the model between plates, angle the mesh so that the die would be inserted from a different direction. The orientation of the model between bases will determine the angle of the pinned die.
    Kirk Redding and 2thm8kr like this.
  11. dagarr

    dagarr New Member

    Hi all,

    I was just trying the orthobases but I Always get this a a result ( See picture). Can somebody help me please I do not know what causes this.

    Attached Files:

  12. cadfan

    cadfan Moderator Staff Member

    speculation scan to short load up stl
  13. josal169

    josal169 Member

    Hello Everyone. I need to print a model with veneers for a Mockup that I designed in Exocad, but I have a problem because the cementing space between the tooth and the veneers and I am trying to fill that space but I dont get it with Meshmixer.
    The idea is to make the veneers and the model a solid part without the cementing space.
    If you can helpme how I can to that.


  14. baheno

    baheno Member

    Klart3.JPG Klart.JPG Klart3.JPG Klart.JPG Klart.JPG

    But not without meshmixer... But always a start :)
    Last edited: Nov 13, 2017
    jerome_de_guadeloupe likes this.
  15. RyanLin

    RyanLin New Member

    Hello, Every Master,
    In Implant case, how to create analog data, so that it can be applied in the model cteator?

    looking forward to your reply~

    model cteator error-1.jpg model cteator error.jpg
  16. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    You need to use NT Trading or Medentika scan bodies and implant library. Those two libraries have analogs in Model Creator. I think Dess will too in new release.
    DMC likes this.
  17. RyanLin

    RyanLin New Member

    OOOps ~
    Have anyway to build it by myself ?
    I can drawing cad and I have exoImplantEditor (2013), Is it helpful?
  18. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Implant Editor is the tool to make an implant library. You should have 2 pdf files with Implant Editor that explain the requirements for the CAD drawings and the process.
    Kirk Redding and cadfan like this.
  19. RyanLin

    RyanLin New Member

    I know how to use ImplantEditor to create the implant library, but I want to know is how to make libraries have analogs in Model Creator.

    Sorry, my English is basic, if misunderstand you, pls forgive me~
  20. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Don't worry about your English. I can't speak your language.

    I have never made an implant library with DIM analogs so I can't advise on how to do it.

    Look for the implant libraries with analogs in exocad/dentalcadapp/library/modelcreator/implants

    Open the folder of implant library in Model Creator and look at the structure. Open xml file with editor like Notepad+
    and see how the xml file is structured. You will need make your library similar.

Share This Page