Help for buying a milling machine

Discussion in 'CNC Machines' started by josepedrojesus, Jul 8, 2019.

  1. josepedrojesus

    josepedrojesus New Member

    I'm researching to buy a new milling machine. I'm looking at vhf r5, imes icore pro + and ivoclar PM7.
    Which ones do they advise?

    Thank you
     
  2. bigbrush

    bigbrush Well-Known Member

    What do you want to do, what is need for?
     
  3. josepedrojesus

    josepedrojesus New Member

    Zirconia, PMMA, Titan, CoCr
     
  4. bigbrush

    bigbrush Well-Known Member

    What will be milled in CrCO and Titan!
     
  5. josepedrojesus

    josepedrojesus New Member

    Bars, about 15, 20 per month and some crowns in CrCo
     
  6. bigbrush

    bigbrush Well-Known Member

    You should look for the best support and possibilities of your Cam software for what you want to mill.
     
  7. josepedrojesus

    josepedrojesus New Member

    I will buy a new cam software too
     
  8. cadfan

    cadfan Moderator Staff Member

    @jesepedrojesus from these 3 only the middle can at the moment left right forget it for the moment maybe in the future.
     
  9. josepedrojesus

    josepedrojesus New Member

    So the imes-icore in your opinion?
     
  10. cadfan

    cadfan Moderator Staff Member

    if you will not mill single abutments from blanck and spend more money yes .
     
  11. josepedrojesus

    josepedrojesus New Member

    As I said before, I want to mill bars, about 15, 20 per month and some crowns in CrCo
    And in terms of reliability?
    Worth the Price?
     
  12. cadfan

    cadfan Moderator Staff Member

    single engaged abutments are more complicated to mill than multi unit bars especially with non " measured " standard tools thats maybe the reason why imes dont reconmend the mill for that . The next step costs 25-30 K more
     
  13. cadfan

    cadfan Moderator Staff Member

    Bars are easier to mill than implants with no add on tool measuring system and standard tools with 10 my dev. next step mill with heavy body is 25-30 K more for better long run stability no one can say with your volume and without knowing how complicated the bars are higher angles moremore complicated bars more vibes to absorb vibes are longrun killers.
     
    bigbrush likes this.

Share This Page