Discussion in 'exocad' started by Michael_aplomb, Feb 16, 2016.
I want to have scan body stl files and then mill them,can you help me?
If you have zz system I hope you also have the implant module ...
Or how will you do when you'll get this library if you don't have the zz implant module ?
So if you have zz implant mudule you also have the library ? no ?
Explain us what you want to do with the zz scanbodies if you don't have implant module ?
Actually I ask my question in different way.
I need an inexpensive way to have scan markers ,how can I take ?
I need scan marker home made.
Tell me which connexion you want ? you could mill it and show us the result and the differents steps you use , (material and machine) if it's good and other members like your result and photos you'll show, I'll send you anothers files ….
3 "like" = 10 files
10 "like" and more = all zz implant files !
you must give before hoping to receive …. no ?
Okay and thank you dear French Cadman. I will send you
Dentium – Implantium® / SuperLine 3.8 and 3.4 ? is it right ?
Confirm me and I'll load tomorrow ....
I didn't know where was the difference 3.4 vs 3.8 now I know where .....
Good luck !
thank you dear French Cadman ,in zz website they have 4 different size but as i know all abutment connections in dentium is the same
Yes that right but the diam of hole is different with 3.4 and 3.8 (where you can use wide screw)
Ma photo n'est pas parfaite mais celle ci est meilleure et comme on dit en France " A cheval donné on ne regarde pas les dents !" . French Cadman
Not too much feedback and pictures Mr REZA I'd have the headache !
I hope the scanbody file works well ....
French actually when I imported file into nesting zz system figured out and didn't mill it.
But a friend of mine told can mill and has his own files .
He is very busy and has not connected to my system yet.
If you have better way to have scan body let me know.
I am actually beginner in cad cam but hope to be professional by your help very soon
Ask Victor at Articon Moscow. He can support You milling interfaces with Cam software.
thank you how can i contact him?
Look at www.articon.ru
This forum really gives me great help,
And I sincerely think that @French Cadman is really the strong mercenary...
I am also very interested in having to know how to use the less expensive way to get scanbody,
I have downloaded the Zirkonzahn Library, too.
But how can I get a file that can be produced scanbody on my own?
Hello Ryan ! which ZZ library did you downloaded ? Ti base ?
First step before creating your own stl scanbody file you must create the implant library who works with , so you need the stl flag, the stl connexion , the analog and optional , screw, ti base ......
The implant editor sets the Z values you'll have between the marker and the connexion but you can also adjust Z ,turn, increase or reduce it with Blender and only at this time when the library folder is saved you can create the stl scanbody , importe the stl marker + stl connexion you saved in the library you have created and merged them
Separate names with a comma.