Millbox Replace feature configuration

Discussion in 'CAM software' started by padano, Oct 5, 2018.

  1. padano

    padano Member

    Hi,

    Who knows how to configure replace feature on Millbox.

    Thanks
     
  2. cadfan

    cadfan Moderator Staff Member

    import case replace left side tools maybe add correction value or corretion value as default over undemill and ax shift if i remeber right
     
  3. padano

    padano Member

    when i clic on replace icon, it gives me library not installed, even i have one in replace folder.
     
  4. padano

    padano Member

    Merci Cadfan,
    everything goes well now.
     
    cadfan likes this.
  5. DMC

    DMC Scott Hudson

    You are machining implants out of Ti?
     
  6. Rigant

    Rigant Active Member

    For a good replace, you need a replace library with strategy of each implant...
     
  7. padano

    padano Member

    I used WorkNc before to mill all my implant connections. Now I'm trying to do the same thing with Millbox , it work but the final result is not good.
    I saw the same feature on sum3d used to finish connection after laser sintering and it works nice.
     
  8. adipas

    adipas Active Member

    cadfan, pls, I want it too...
     
  9. cadfan

    cadfan Moderator Staff Member

    @ adipas Its part of millbox and the strats so think you have it c millbox replace are the cam files work with the newer strats only dont now which

    second pic is in the settings where you can adapt for each material and a lot implants but other things like crowns , tk, glue parts and so on too
     

    Attached Files:

    Rigant likes this.
  10. adipas

    adipas Active Member

    thank you for answer cadfan.

    that's why I asked for:

    Untitled.jpg
     
  11. Rigant

    Rigant Active Member

    it is beacause you dont have any "replace" libraries... you need contact with CIMSystem!!
     

Share This Page