STL of a shade guide

Discussion in 'Rapid-Prototyping' started by Hourglass716, May 5, 2019.

Tags:
  1. Hourglass716

    Hourglass716 New Member

    Does anybody have an STL file for a shade guide/ shade tab?

    I want to mill my own VITA shade guide from a preshaded zirconia. Is there an STL file for this somewhere?
     
  2. DMC

    DMC Scott Hudson

    How thick you want it? How about a stepped tab?

    0.4 at edge?

    Then 0.6 step?

    Then 1.0mm ...leading to the handle with 3mm end to hold?

    Total width about 3mm?
     
    ceramart likes this.
  3. Toothman19

    Toothman19 Well-Known Member

    That would be cool. Could you make them 16mm tall? That way I would know exactly where to place the crowns in the puck?
     
    ceramart likes this.
  4. Toothman19

    Toothman19 Well-Known Member

    I stopped being lazy and made this real quick
     

    Attached Files:

    kim white and cadfan like this.
  5. Dale Moss CDT

    Dale Moss CDT New Member

    That's really nice! Thanks!
     
  6. kim white

    kim white New Member

    how would you make the attachment for this for the tab
     
  7. Toothman19

    Toothman19 Well-Known Member

    Just glue in a dowel pin
     

Share This Page