Surgical guide

Discussion in 'CAM software' started by bogdanalexsever, Nov 4, 2018.

  1. bogdanalexsever

    bogdanalexsever New Member

    I built a surgical guide in 3shape and exported it to a stl file.
    Now I am trying to mill it with my imes 250i with CORITEC ICAM V5 SMART and the result is that i get a perfect splint but no guide cylinder .
    It does not mill anything there.
    Could anybody please advice?
    Thank you so much !

    Attached Files:

  2. cadfan

    cadfan Moderator Staff Member

    use the wright import case ( surgical guide ) maybe no holes detected for some reason detect them by hand or ask your reseller for a small training.

    put in seperate file desktop or so to import without constr info or how ever its called in 3 s helps sometimes too or load up stl try tomorrow.
    Last edited: Nov 4, 2018
  3. cadfan

    cadfan Moderator Staff Member

    and by the way use the wright folder not the lower jaw lol.

Share This Page