The next two LCD based on the road

Discussion in 'Rapid-Prototyping' started by cadfan, Dec 28, 2017.

  1. cadfan

    cadfan Moderator Staff Member

  2. DMC

    DMC Scott Hudson

    Remember CRT televisions.

    Those tubes send out good wave for curing resins. Just a little info to share.
     
  3. DMC

    DMC Scott Hudson

    The claim of highest resolution ever is total crap.

    45um on x and y is not that amazing.
    Why do they claim this?:confused:

    The most popular 3d printer for jewelry is same for a decade.

    3d systems CPX is still king everywhere on the planet for jewelry....but it requires a lot of service :(
    Good for me because i fix those pieces of crap.
     
  4. Kostantinos

    Kostantinos Member

    I had also order a phrozen make... For fun... To play with it...

    Στάλθηκε από το P8_Mini μου χρησιμοποιώντας Tapatalk
     
    DMC and cadfan like this.
  5. DMC

    DMC Scott Hudson

    Tell me how it goes.

    These printers that peel off layers from Glass (Teflon coated glass usually?) sometimes have issues with parts sticking to the glass, or falling off the build.

    That is 99% of all tabletop printers, including most envisiontec models.
     
  6. cadfan

    cadfan Moderator Staff Member

  7. DMC

    DMC Scott Hudson

  8. cadfan

    cadfan Moderator Staff Member

    Kongo-Otto likes this.
  9. Kostantinos

    Kostantinos Member

    Well, i have small lab thats why i decide to get phrozen make... In near future i can do a review, if you interested, i choose it because have led mask array...[​IMG]

    Στάλθηκε από το P8_Mini μου χρησιμοποιώντας Tapatalk
     
    DMC and cadfan like this.
  10. DMC

    DMC Scott Hudson


    No no....again you have wrong side of the part man.

    That is the top part.....not the bottom part that peels away each layer.

    The top....YEs we want it to stick for entire build, then hammer time to remove.

    The bottom....after each layer is necessary to peel away and go up in Z axis, then repeat. Resin fills in the space, then cure, then peel.
    The bottom Teflon gets ruined very fast. It is not easy to make your own.
    I do not know of anyone who can do this.

    Yes, I see your link to the parts.....but that printer has issues. Does not work so well in my opinion. Envisiontec is sheet of glass with Teflon attached and not able to service.
    Goes into trash and you get another glass plate with Teflon permanently attached.
     
    Last edited: Dec 29, 2017
  11. cadfan

    cadfan Moderator Staff Member

    in the bottom is the teflon film which is part of the resin tube the object is build on the up going alu plate seperation versus adhasion , kohasion break of the resin is not broken or leveled with a wiper its broken with a fast up down of the z ax and on some printers with a kind of shacking too
    maybe i am wrong but i cant see more parts i can change.


     
    Last edited: Dec 29, 2017
    Baldurbrau and v450 like this.
  12. Kostantinos

    Kostantinos Member

    I receive the Phrozen Make.. The resin material is a cheap one.... I must change it... 2 days try for correct calibration xy... It worth the money cost 100℅[​IMG][​IMG]

    Στάλθηκε από το P8_Mini μου χρησιμοποιώντας Tapatalk
     
    French Cadman, DMC and cadfan like this.
  13. cadfan

    cadfan Moderator Staff Member

    not bad for a 1 buck printer

    Schirmfoto_2018-01-13_093825.jpg
     
    Kostantinos and DMC like this.
  14. cadfan

    cadfan Moderator Staff Member

    thats real easy if the medical resigns are out i am in.




    or home brewed tools in the big one


     
  15. cadfan

    cadfan Moderator Staff Member

    Just for information the Precision is out for different kind of reason not really recommendable but stay tuned the show goes on with others !!
     
    AGV likes this.
  16. Kostantinos

    Kostantinos Member

    Phrozen Make- FTD dentifix 100um- crown Nextdent C&B50um [​IMG][​IMG][​IMG]

    Στάλθηκε από το TA-1012 μου χρησιμοποιώντας Tapatalk
     
    Last edited: Apr 16, 2018
    DMC likes this.
  17. cadfan

    cadfan Moderator Staff Member

    hopefully your scanners are as good too

    Schirmfoto_2018-05-15_082811.jpg
     
    Alex R. and DMC like this.
  18. cadfan

    cadfan Moderator Staff Member

    latest impression

    IMG_1931.JPG
     
    2thm8kr likes this.
  19. cadfan

    cadfan Moderator Staff Member

    another printer same model. IMG_1939.JPG
     
  20. Kostantinos

    Kostantinos Member

    Can you email me this .stl to print?


    Στάλθηκε από το TA-1012 μου χρησιμοποιώντας Tapatalk
     

Share This Page